米朗MRH-1202-100T PLC半自动油脂泵

MRH-1202-100T

PLC半自动油脂泵 Semi-automatic Grease Lubrication Pump

技术参数Technical Parameters

操作方式 Operating mode	PLC控制
额定注油压力 Max.discharge pressure	0~100Kgf/cm²
注油流量 Theoretical discharge	50ml/min
电机电压 Motor voltage	110/ 220/380VAC
电机功率 Motor power	40W
润滑油粘度范围 Viscosity range	Variety 000#~00#
油箱容积 Reservoir	1/2/3/4L
出油口管道 Outlet pipe	Φ6mm
适用系统 Applicable system	抵抗式

接线图The wiring diagram

性能与特点Performance Characteristics

1 .供油和间歇时间同主机电脑控制设定。

2 .油箱容量有1/2/3/4L，吐出量5 0 m l / m i n，视油箱有油位计。

3 .电动油脂泵是用交流电源驱动的润滑脂泵,它通过电机和机械传动将润滑脂不断输出,该泵可用于抵抗式分配器将

润滑油脂注入所需润滑点;该泵体积小,输出流量大,广泛用于轻工/锻压自动化等机械设备的集中润滑系统中。

1. Oil supply and intermittent time is settled by host computer.

2. The fuel tank capacity is 1/2/3/4L, and the discharge amount

is 50ml/min.The tank has an oil level gauge.

3. The electric oil pump is driven with AC power grease pump.

The grease will output unceasingly through the motor and

mechanical transmission. The pump can be used to resist

distributor which will inject grease into lubrication points.

The pump has a small volume and large output flow。 It is widely

used in the centralized lubrication system of light

industry/forging and pressure automation equipment.

深圳市米朗科技有限公司